Detail & Specs
NW6AMERBLKSS - Wing Nut American Style Stainless Black
M6x1, M6x1.00, M6
Wing style nuts allow for greater leverage when tightening. Wing nuts are often used for assemblies which are put together or taken apart by hand, only finger pressure is required to tighten and loosen the nut.
Pitch: 1.0 Coarse Thread
Base Diameter Max: 11.9mm
Height Max: 12.9mm
Wing Span Max (Overall Width): 27.0mm
Wing Thickness: 3.0mm
Material: Stainless Steel
Suitable for damp locations
Finish: Black Oxide
Attractive matte black finish
Abrasion resistant, does not peel, chip or rub off
Reduces friction, prevents galling
Does not change the strength of the stainless steel
Practically no dimensional change to base fastener
The black oxide coating per MIL-DTL-13924, Class 4 on 300 series corrosion resistant steel will show no signs of corrosion after 96 hours of exposure in a 5% salt spray (fog) test in accordance with ASTM B117.
Commonly uses on motorcycles, boats, license plates.
Specifcation: DIN 315 "American" Style (Straight Wing)
Special Bulk Order Variations: M3X0.5, M4X0.7, M5X0.8, M8X1.25, M10X1.5, M12X1.75, M14X2.0