This configuration is not available. Make another selection.
Metric M10X1.5 - Double End Stud Class 10.9 Hardened
M10X1.5, M10X1.50, M10
Double ended studs, or "tap end studs" have a shorter length of thread on one side, an unthreaded middle shank, and a longer length of thread at the other end. Both sides of the stud are right hand thread.
Diameter: 10mm
Pitch: 1.5
Material: Class 10.9 Steel, High Strength
Also known as threaded pin, externally threaded headless fastener
Included SKUs:
SH10X110DBLK,
SH10X40DBLK,
SH10X80DBLK,
SH10X70DBLK,
SH10X190DBLK,
SH10X150DBLK,
SH10X100DBLK,
SH10X180DBLK,
SH10X140DBLK,
SH10X55DBLK,
SH10X130DBLK,
SH10X50DBLK,
SH10X90DBLK,
SH10X170DBLK,
SH10X65DBLK,
SH10X35DBLK,
SH10X60DBLK,
SH10X30DBLK,
SH10X120DBLK,
SH10X160DBLK,
SH10X45DBLK,
SH10X75DBLK,
SH10X56DCLZ,
SH10X42DCLZ,
SH10X58DBLK,
SH10X77DCLZ,
SH10X51DCLZ,
SH10X94DCLZ,
SH10X68DBLK,
SH10X37DCLZ,
SH10X52DBLK,
SH10X40DCLZ,
SH10X116DCLZ
This configuration is not available. Make another selection.
This configuration is not available. Make another selection.
This configuration is not available. Make another selection.
