Detail & Specs
This configuration is not available. Make another selection.
Metric Brake Banjo
To be used with an M10 banjo bolt with sealing gaskets on either side (not included).
This fitting requires a banjo bolt with a reduced neck for proper flow. Our banjo bolts that are suitable for brake applications are preferred. Cohline banjos will NOT work with this fitting, the tolerance is too tight for fluid movement.
Mates with an M10X1.0 brake line nut that utilizes a double / inverted flare.
Internal orifice diameter 3.0mm (flow)
45° inverted seat
Material: Steel
Finish: Zinc Plating
