This configuration is not available. Make another selection.
Metric M10X1.25 - Double End Fine Stud Class 10.9 Hard
M10x1.25, M10X1.250
Double ended studs, or "tap end studs" have a shorter length of thread on one side, an unthreaded middle shank, and a longer length of thread at the other end. Both sides of the stud are right hand thread.
Diameter: 10mm
Pitch: 1.25 Extra Fine Thread
Material: Class 10.9, High Strength
Also known as threaded pin, externally threaded headless fastener
Included SKU's:
SH10X1.25X30DBLK, SH10X1.25X35DBLK, SH10X1.25X37DBLK, SH10X1.25X40DBLK, SH10X1.25X43DBLK, SH10X1.25X45DBLK, SH10X1.25X47DBLK, SH10X1.25X48DBLK, SH10X1.25X48DCLZ, SH10X1.25X49DCLZ, SH10X1.25X50DBLK, SH10X1.25X53DPLN, SH10X1.25X55DBLK, SH10X1.25X58DBLK, SH10X1.25X60DBLK, SH10X1.25X65DBLK, SH10X1.25X69DBLK, SH10X1.25X70DBLK, SH10X1.25X75DBLK, SH10X1.25X80DBLK, SH10X1.25X81DBLK, SH10X1.25X85DBLK, SH10X1.25X87DBLK, SH10X1.25X90DBLK, SH10X1.25X95DBLK, SH10X1.25X100DBLK, SH10X1.25X110DBLK, SH10X1.25X120DBLK
