This configuration is not available. Make another selection.
Metric M10X1.25 - Double End Fine Stud Class 10.9 Hard
M10x1.25, M10X1.250
Double ended studs, or "tap end studs" have a shorter length of thread on one side, an unthreaded middle shank, and a longer length of thread at the other end. Both sides of the stud are right hand thread.
Diameter: 10mm
Pitch: 1.25 Extra Fine Thread
Material: Class 10.9, High Strength
Also known as threaded pin, externally threaded headless fastener
Included SKUs:
SH10X1.25X58DBLK,
SH10X1.25X70DBLK,
SH10X1.25X49DCLZ,
SH10X1.25X35DBLK,
SH10X1.25X43DBLK,
SH10X1.25X48DCLZ,
SH10X1.25X75DBLK,
SH10X1.25X120DBLK,
SH10X1.25X80DBLK,
SH10X1.25X40DBLK,
SH10X1.25X85DBLK,
SH10X1.25X90DBLK,
SH10X1.25X37DBLK,
SH10X1.25X45DBLK,
SH10X1.25X50DBLK,
SH10X1.25X95DBLK,
SH10X1.25X55DBLK,
SH10X1.25X48DBLK,
SH10X1.25X60DBLK,
SH10X1.25X100DBLK,
SH10X1.25X47DBLK,
SH10X1.25X30DBLK,
SH10X1.25X110DBLK,
SH10X1.25X53DPLN,
SH10X1.25X65DBLK,
SH10X1.25X81DBLK,
SH10X1.25X69DBLK,
SH10X1.25X87DBLK
This configuration is not available. Make another selection.
This configuration is not available. Make another selection.
This configuration is not available. Make another selection.
