This configuration is not available. Make another selection.
Metric M6X1.0 - Double End Stud Zinc Class 10.9 Hardened
M6X1.00, M6X1.0, M6
Double ended studs, or "tap end studs" have a shorter length of thread on one side, an unthreaded middle shank, and a longer length of thread at the other end. Both sides of the stud are right hand thread.
Diameter: 6mm
Pitch: 1.00 Coarse Thread
Material: Class 10.9 Hardened Steel
Also known as threaded pin, externally threaded headless fastener
Included SKUs:
SH6X130DBLK,
SH6X55DBLK,
SH6X70DBLK,
SH6X31DCLZ,
SH6X30DBLK,
SH6X140DBLK,
SH6X180DBLK,
SH6X170DBLK,
SH6X65DBLK,
SH6X40DBLK,
SH6X25DBLK,
SH6X80DBLK,
SH6X110DBLK,
SH6X120DBLK,
SH6X75DBLK,
SH6X35DBLK,
SH6X50DBLK,
SH6X25DCLZ,
SH6X90DBLK,
SH6X150DBLK,
SH6X160DBLK,
SH6X45DBLK,
SH6X23DCLZ,
SH6X190DBLK,
SH6X100DBLK,
SH6X60DBLK,
SH6X45ACLZ
This configuration is not available. Make another selection.
This configuration is not available. Make another selection.
This configuration is not available. Make another selection.
