Detail & Specs
This configuration is not available. Make another selection.
DIN 910 Hex Head MAGNETIC Drain Plug / Stainless Steel
Metric hex head drain plugs with magnets are meant to remove metal debris and particles from engine oil, allowing the oil to flow smoothly and extending the life of the oil filter and the engine.
These plugs are reusable, the slivers of metal caught by the magnet can be wiped away easily using a rag.
Drain plugs are used extensively for commercial, industrial, automotive, boats, sanitary pipes and fittings. Consider using a thread sealant or thread seal tape on the plug prior to installation for an extra secure seal, reducing the possibility of leakage.
Magnets
Rare Earth NEO (Neodymium) that work up to 248F and are coated in a nickel-copper-nickel three step process to prevent rusting or pitting. The magnets are pressed into the plugs and securely held in place with a two-part steel weld epoxy rated to 300F, with a strength rating of 4500 PSI and is resistant to oils and most chemicals.
Hex Head Styles
Used for plugging parallel thread tapped holes. These drain plugs have a taper under the flange style head to seat a crush or sealing washer. The sealing ring secures the plug against the hole, preventing leakage. Use with our copper or aluminum gaskets as well as bonded sealing gaskets.
Material
Made of highly durable A2 stainless steel that possesses superior anti-corrosive properties suitable for use in wet environments, used extensively for commercial, industrial, automotive, boats, sanitary pipes and fittings.
