As of May 1, 2021 our website no longer supports Internet Explorer 11.

We recommend that you update your browser here.

Microsoft Edge | Firefox | Chrome

Free Domestic Shipping at $49.99

M24X1.5 Taper Plug + Magnet

OEM / Yellow Loctite

Part# DP24X1.5TMAG

SKU: 00-DP-MAG-T-Steel
$16.36

This configuration is not available. Make another selection.

Detail & Specs

This configuration is not available. Make another selection.

Magnetic Drain Plug / STEEL

Metric drain plugs with magnets are meant to remove metal debris and particles from engine oil, allowing the oil to flow smoothly and extending the life of the oil filter and the engine.

These plus are reusable, the slivers of metal caught by the magnet can be wiped away easily using a rag.

Drain plugs are used extensively for commercial, industrial, automotives, boats, sanitary pipes and fittings. Consider using a thread sealant or thread seal tape on the plug prior to installation for an extra secure seal, reducing the possibility of leakage.

Magnets
Rare Earth NEO (Neodymium) that work up to 248F and are coated in a nickel-copper-nickel three step process to prevent rusting or pitting. The magnets are pressed into the plugs and securely held in place with a two-part steel weld epoxy rated to 300F, with a strength rating of 4500 PSI and is resistant to oils and most chemicals.

Taper Style
Taper plugs seal via metal-to-metal wedging of male and female taper thread patterns. Headless stainless steel plug style, no sealing washer required. Consider using a thread sealant on the plug prior to installation to achieve adequate seal and to reduce the possibility of leakage.

View All Gaskets Here