M3.2 Torx Oval Head

M3.2 Stainless Torx Oval Head, Wood Thread, Drilling Tip

Floorboard screws with six lobe drive

How to Measure Length:

Always measured from the beginning of the undercut of the head (where the raised oval convex meets the 90 degree angle) to the end of the self drilling tip.

Which materials can this screw be used with?

• Wood / Timber, Engineered Wood, Composite Wood, Floorboards

What are the benefits of choosing this screw?

• Eliminates need to Pre-Drilling for most hardwood applications.
• Self-Drilling point prevents cracks and splintering cracks in most hardwood applications.
• Flutes on Self-Drilling point help remove material as the screw is installed.
• Underside of head is reinforced with ribs for cleanest countersunk install.
• Great for low edge displacement applications.

Why choose a Six-Lobe Torx Drive?

Torx drive screws provide higher torque transfer because the driving forces are transferred to each surface of the six lobes (wobble-free), instead of the four edges of the four edges on a phillips drive. Less overall force is needed to install these screws.

The slim design of an torx socket wrench allows access to tight locations.

Material:  A2 / SAE Type 304

A2 Stainless wood screws are commonly used on residential and commercial exteriors, solar installation, decking, terraces, fences, exterior stairs, porch furniture, recreational / playground equipment, pergolas, facades, railings, architectural facades and finish work.

For any application involving marine (salt water), use A4 / 316 Stainless Steel material.