This configuration is not available. Make another selection.
Metric M8X1.25 - Double End Stud Class 10.9 Hardened
M8X1.25, M8X1.250, M8
Double ended studs, or "tap end studs" have a shorter length of thread on one side, an unthreaded middle shank, and a longer length of thread at the other end. Both sides of the stud are right hand thread.
Diameter: 8mm
Pitch: 1.25
Material: Class 10.9 Steel, High Strength
Also known as threaded pin, externally threaded headless fastener
Included SKUs:
SH8X75DBLK,
SH8X90DBLK,
SH8X50DBLK,
SH8X38BLK,
SH8X150DBLK,
SH8X160DBLK,
SH8X45DBLK,
SH8X190DBLK,
SH8X100DBLK,
SH8X60DBLK,
SH8X130DBLK,
SH8X88CLZ,
SH8X95DBLK,
SH8X30DBLK,
SH8X55DBLK,
SH8X70DBLK,
SH8X140DBLK,
SH8X25DBLK,
SH8X180DBLK,
SH8X170DBLK,
SH8X65DBLK,
SH8X80DBLK,
SH8X40DBLK,
SH8X35DBLK,
SH8X110DBLK,
SH8X120DBLK,
SH8X79DCLZ,
SH8X41DCLZ,
SH8X97DCLZ,
SH8X57DBLK,
SH8X61DCLZ,
SH8X47DCLZ,
SH8X36DBLK,
SH8X41DBLK,
SH8X66DBLK,
SH8X42DCLZ,
SH8X62ABLK
This configuration is not available. Make another selection.
This configuration is not available. Make another selection.
This configuration is not available. Make another selection.
